Laboratory

Physical and Electronic Laboratory Equipment

place of work in the laboratory of TEC-Institut

In addition to the basic equipment the laboratory of TEC-Institut allocates the following measurement devices

Measurement technology

– EMC (Electro-magnetic Compliance Chamber) – shields equipment from electro-magnetic interference by Frankonia
– Process computer / Process control
“HYDRA” by Kinzinger
– 8 channel ICP unit by Synotech
– measurement charts by National Instruments
– Spectrum – Analyzer HP 8594 EMC
– 4 channel oscilloscope, Tektronix
TDS 3054 500 MHz
– RCL – measurement device, Fluke PM 6304
– 3 channel gaussmeter 9950 by
F.W. Bell with various sensor (0 bis 50 KHz)
– Fluxmeter F1 by MAGSYS
– 3D E/H field meter ESM-100 by Maschek
– Cryo- canning electron micrograph
ISI DS 130
– Amplifier AG 1006 LF Power
(20kHz to 10 MHz), T&C Power Conversion Inc.

Measurement software/Interpretation

– Dasylab
– Diadem
– Origin

Power and Voltage Supply

– High Voltage supply unit 60kV
at 3mA (+/- reversible) by
Heinzinger
– Programmable power supply
0 to 35 V and 0 to 45 A by
Delta-Elektronik.
– NF Power amplifier 500 W,
by Thiel
– Signal generator / Synthesizer 6062A
by Fluke
– Small signal generators, single and
– double power supply units
– Various insulating transformers for ungrounded
und isolated measuring, for
mobile use.
– portable power Station for
mobile use

High grade Sensors:

– Temperature, retraceable on DKD (Deutscher
Kalibrier-Dienst = a German association for
calibrations according to certified standards)
– Pressure
– Vibration
– Electro-magnetic interference probes

 

Measuring technology specialized on photovoltaics

Various digital Multimeters
with RS 232- respectively. USB ports
(about 50 devices in total):

– Fluke 45
– Fluke 89 IV
– Fluke i410
– Voltcraft VC 820
– Voltcraft ME-42
– Voltcraft M-4669M

Various measuring devices for environmental data monitoring:

– Pt 100-Outside temperature registration
– Barometer, Setra 270
– Hygrometer, RS 312-2939
– Anemometer, Warema
– Rain sensor, Hygrosens CON-REGME-12 V
– Pyranometer, Kipp & Zonen CMP 3A.C. meter (about 20 devices):

– AEG J 16 G
– Siemens W 204

Alternating current converters (inverters):

– Steca, StecaGrid 500-M
– Mastervolt, Soladin 600
– SMA SB 2100 TL
– SMA SB 1100
– Solutronic, Solplus 25

Automatic Disconnection:

– UfE, ENS 26

Flasher:
– JDSGC – 8CM

Characteristic curves measuring device

– TRITEC TRI-KA

Measuring charts (about 25 in total):

– PCI Card 4 Port serial, Conrad, IO-104
– PCI 6 x RS 232 Card, Conrad, 974514
– USB-Interface Card, Velleman K8055
– USB-Interface Card, Velleman K8061

Measuring software / Interpretation:

– VisualBasic 6.0
– MS-Excel 2003
1. Various, additional measuring computers
(IBM, Compaq, Dell, Siemens-Nixdorf)
with an according number of ports
( about 20 devices in total)

2. Various, additional power resistors (up to 300 W)